Smart Gigabit Ethernet 10 / 100 / 1000Base -T to 1000Base - SX / LX Converter with One SFP Slot
Product Description
MCG-SFP series is a Ethernet media converter that converts media transmission between TP copper cablings an fiber SFP(Small Form-Factor Pluggable) Transceivers. The MCG-SFP copper-to-fiber module is available in 10/100/1000Mbps Fast Ethernet types, allowing seamless integration between Fast Ethernet networks using unshielded twisted pair (UTP) copper cabling, and 1000M fiber networks.
The MCG-SFP-L with DIP switch for smart settings of LFP for network diagnosis and transmission mode.
Features
Conversion between different transmission speeds and media types
Standalone and compact hardware design
Auto-negotiating Ethernet port (Speed and Half/Full Duplex)
Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
Standard open Fiber slots for SFP Transceiver
The transmission of extra-long packes over VLAN
9K Jumbo Frame size supported
Easy-to-view LED indicators provides status to easily monitor network activity
Voltage supervisor
14-Slot Rack compliance
RoHS Compliant
LFP function(Link fault pass through)
With DIP switch to set LFP enable or disenable, to set Cut-through mode or store-and-forward mode
Technical Specifications:
| Parameter |
Specifications |
| Access mode |
10/100/1000Mbps Gigabit Ethernet |
| Standard |
IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength |
850nm/1310nm/1550nm or CWDM wavelength |
| Port |
One RJ45 connector, connected to STP/UTP category-5 twisted pair
One SFP Port, connected to MM or SM fiber
|
| Conversion mode |
Medium conversion, storing and forwarding |
| MAC address table |
I K |
| Buffer space |
1Mbit |
| Flow control |
Full duplex state: flow control; half duplex state: back pressure mode |
| Delay |
9.6us |
| Bit error rate |
<1/1000000000 |
| MTBF |
100,000 hours |
| LED |
POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action) |
| Power |
Input: AC220 1A/ DC-48
Output: 5V 1A
|
| Power consumption(Max) |
≤5W |
| Operating temperature |
-10~55℃ |
| Operating humidity |
5%~90% |
| Storage temperature |
-40~70℃ |
| Storage humidity |
5%~90% (non-condensing) |
| Dimensions |
26mm(H)*70mm(W)*94mm(D) (height * width * depth) |
DIP switch(LFP Function)
|
SW1
|
ON |
LFP enable |
| OFF |
LFP disable |
| SW2 |
ON |
Cut-through mode |
| OFF |
Store-and-forward mode |
Product Tags:
|
|
Smart Gigabit Ethernet Fiber Media Converter High Durability With Low Power Consumption Images
|
